0704-2440JDCP7540/01

2024年11月28日

1)荔灣3-1CEP平臺 20”HIPPS 系統：所用邏輯控制器形式為固態或可編程，關斷閥尺寸為20”，壓力磅級為1500LB，密封形式為硬密封，主體材質為雙相鋼，整體安全完整性等級（SIL）不低于 SIL3。2)海油石油119 FPSO 6”HIPPS 系統：所用邏輯控制器形式為固態或可編程，關斷閥尺寸為6”，壓力磅級為1500LB，密封形式為硬密封，主體材質為雙相鋼，整體安全完整性等級（SIL）不低于 SIL3。1)20” HIPPS for LW3-1 CEP：The logic controller used is a solid-state or PLC logic controller, with a shut down valve size of 20", a pressure rating of 1500LB, the valve sealing form is a hard seal, and the valve body material is duplex stainless steel, HIPPS safety integrity level (SIL) is required to no less then SIL3.2)6” HIPPS for HYSY119 FPSO: The logic controller used is a solid-state or PLC logic controller, with a shut down valve size of 6", a pressure rating of 1500LB, the valve sealing form is a hard seal, and the valve body material is duplex stainless steel, HIPPS safety integrity level (SIL) is required to no less then SIL3.

因此處字?jǐn)?shù)受限，交貨期要求見標段/包內容處

2套

高完整性壓力保護系統？？？？ ？？？？？？？？？？？ Name of Goods: High Integrity Pressure Protection System (HIPPS)

詳見招標文件

詳見招標文件

（1）資格要求 Requirements for Qualification of BidderA．★營業執照：如果投標人為境內注冊公司，投標人需提供合法有效的企業法人營業執照、稅務登記證及組織機構代碼證或證照合一的營業執照；如果投標人為境外注冊公司，需提供有效的公司登記注冊證明。A．★Business licence: The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license;The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.B．★制造商要求:所投產品為國內產品：投標人需是邏輯控制器的制造商或取得邏輯控制器制造商唯一授權的成撬商。所投產品為境外產品：允許邏輯控制器的制造商或取得邏輯控制器制造商唯一授權的成撬商或代理商投標。 投標人為代理商或成撬商時，應得到本次投標邏輯控制器制造商的唯一合法授權，并需提供以下材料（蓋制造商公章）：1）在有效期內邏輯控制器制造商唯一授權書原件，或該原件的復印件（原件備查，并承諾如中標將在合同簽署前提供該原件）；2）HIPPS系統邏輯控制器制造商承諾函，承諾投標所投產品為制造商工廠生產。The bid products are domestic products：Bidders must be logic controller of HIPPS’s Manufacturers, or the Skid Makers which is sole authorized by the logic controller of HIPPS’s Manufacturers.The bid products are overseas products: Logic controller of HIPPS’s Manufacturers or Skid Maker or Agent which is sole authorized by the logic controller of HIPPS’s Manufacturers are allowed to bid.If the Bidder is a Skid Maker or Agent，must obtain the sole legal authorization by the logic controller of HIPPS’s Manufacturers in this bid, and shall provide the following documents （stamped with the official seal of the Manufacturer) :1）The original unique authorization letter from logic controller Manufacturer within the validity period，or the copy of the original (the original is for reference, and the Bidder must promise that if the bid is won, the original unique authorization letter will be provided before the contract is signed);2）Commitment letter from the Manufacturer of the HIPPS logic controller, promising that the bidding products will be produced by the Manufacturer's factory.C．★質量體系認證要求:投標人所投邏輯解算器與HIPPS系統內關斷閥的制造商應通過ISO9001（或GB/T19001）質量體系認證。投標人須提供制造商有效的質量體系認證證書。C．★Quality Management System Certification requirement: The manufacturer of the HIPPS SDV and logic controller shall pass Quality Management System Certification ISO9001（or GB/T19001）Certification. Bidder shall provide valid Certificate of Quality Management System Certification of manufacturer.D. ★是否接受聯合體投標：否。D. ★Joint Venture: Not Accepted.E.未領購招標文件是否可以參加投標:不可以。E.Bid without the bidding documents：NOT Available.（2）資質要求及證明文件Requirements of Qualification of Bidder and Certificate：★HIPPS特種證書要求：投標人所供HIPPS系統中的閥門制造商應取得由國家市場監督管理總局頒發的特種設備生產許可證TS A1及覆蓋本次招標范圍的由第三方頒發的特種設備型式試驗證書，投標人應在投標時提供上述證書的掃描件?！颰he HIPPS special certificate requirements:The manufacturers of pressure pipeline components such as valves and matching flanges in the HIPPS system provided by the bidder shall obtain the special equipment manufacturing license (TS A1 certificate) awarded by State Administration for Market Regulation and the special equipment type test certificate covering the scope of this bidding awarded by third party,Bidders should provide scanned copies of the aforementioned certificates during the bidding process.（3）★業績要求Requirement for Bidder's reference:因本處字?jǐn)?shù)受限，業績要求見標段/包內容處。

2024年11月28日 至 2024年12月05日

在售標截止日期前，在招標公告頁面進行購買。

200.00元

2024年12月19日 09時00分

所有的投標文件必須在投標文件截止時間前在線提交

在投標截止日期前，按照招標文件要求的投標文件送達地點送交投標文件。

2024年12月19日 09時00分

中國海油供應鏈數字化平臺

如有不一致，以公告附件中的招標公告為準。